1 2 3 4 5 6 7 8 9
123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890
------------------------------------------------------------------------------------------
SIMPLE = T / file does conform to FITS standard
BITPIX = 16 / number of bits per data pixel
NAXIS = 2 / number of data axes
NAXIS1 = 2080 / length of data axis 1
NAXIS2 = 4100 / length of data axis 2
EXTEND = F / FITS dataset may contain extensions
BZERO = 32768.0 / offset data range to that of unsigned short
BSCALE = 1.0 / default scaling factor
BUNIT = 'ADU ' / Unit of original pixel value
BLANK = -32768 / Value used for NULL pixels
DATE-OBS= '2011-11-03' / Observation start date (yyyy-mm-dd)
UT = '15:18:05.753' / HH:MM:SS.S typical UTC at the exposure (middle
UT-STR = '15:18:05.753' / HH:MM:SS.S UTC at the start exposure time
UT-END = '15:21:05.010' / HH:MM:SS.S UTC at the end of the exposure
HST = '05:18:05.753' / HH:MM:SS.S Typical HST at exposure
HST-STR = '05:18:05.753' / HH:MM:SS.S HST at the beginning of exp.
HST-END = '05:21:05.010' / HH:MM:SS.S HST at the end of exposure
LST = '05:43:50.641' / HH:MM:SS.SSS Typical LST at exposure
LST-STR = '05:43:50.641' / HH:MM:SS.SSS LST at the beginning of exposure
LST-END = '05:46:50.389' / HH:MM:SS.SSS LST at the end of exposure
MJD = 52915.637562 / [d] Mod. Julian Date at typical time
TIMESYS = 'UTC ' / Time System used in the header
MJD-STR = 52915.637562 / [d] Mod.Julian Date at the start of exposure
MJD-END = 52915.639637 / [d] Mod.Julian Date at the end of exposure
ZD-STR = 56.493 / [degree] Zenith Distance at exposure start tim
ZD-END = 57.152 / [degree] Zenith Distance at exposure end time
SECZ-STR= 1.811 / SEC(Zenith Distance) at exposure start time
SECZ-END= 1.844 / SEC(Zenith Distance) at exposure end time
AIRMASS = 1.8400 / Average airmass during exposure
AZIMUTH = 248.953 / [degree] Azimuth of tel-pointing. 0:N->90:E
ALTITUDE= 33.509 / [degree] Altitude ang. of telescope pointing
PROP-ID = 'o11111 ' / Proposal ID
OBSERVER= 'SuprimeCam' / Names of the Observers
FRAMEID = 'SUPA00250799' / Image sequential number
EXP-ID = 'SUPE00250790' / ID of exposure (shot) this data were taken
DATASET = 'DS000 ' / ID of dataset this data were taken
OBS-MOD = 'IMAG_N ' / Observation Mode
OBS-ALOC= 'Observation' / Allocation Mode
DATA-TYP= 'OBJECT ' / Characteristics of this data
OBJECT = 'Nandesuka ' / Identification of object observed
RA = '02:17:57.646' / Right ascension of telescope pointing
DEC = '-05:26:18.56' / Declination of telescope pointing
RA2000 = '02:17:57.646' / Right ascension of telescope pointing (J2000)
DEC2000 = '-05:26:18.56' / Declination of telescope pointing (J2000)
OBSERVAT= 'NAOJ ' / Observatory
TELESCOP= 'Subaru ' / Telescope name
FOC-POS = 'Prime ' / Position of the instrument focus unit
TELFOCUS= 'Prime ' / The Focus where beam reaches
FOC-VAL = 7.800 / [mm] Encoder value of the focus unit
FILTER01= 'W-S-I+ ' / Filter name/ID
EXPTIME = 180.0 / [sec] Total integration time
INSTRUME= 'SuprimeCam' / Name of instrument
DETECTOR= 'w7c3 ' / Name of the detector/CCD
DET-ID = 9 / ID of the detector used for this data
DET-A01 = 1.571 / [degree] Relative angle of the nn-th detector
DET-P101= 47.220 / [mm] Relative X-position of the nn-th detector
DET-P201= 0.705 / [mm] Relative Y-position of the nn-th detector
DET-TMP = 166.39 / [Kelvin] Detector temperature
DET-TMED= 0.00 / [Kelvin] Median of the detector temperature
DET-TMIN= 0.00 / [Kelvin] Minimum of the detector temperature
DET-TMAX= 0.00 / [Kelvin] Maximum of the detector temperature
GAIN = 2.500 / AD conversion factor (electron/ADU)
EFP-MIN1= 33 / Start position of effective frame in axis-1
EFP-RNG1= 2048 / Range of effective frame in axis-1
EFP-MIN2= 1 / Start position of effective frame in axis-2
EFP-RNG2= 4100 / Range of effective frame in axis-2
PRD-MIN1= 1 / Start X position of partialy read out
PRD-RNG1= 2080 / X range of the partialy readout
PRD-MIN2= 1 / Start Y position of partialy read out
PRD-RNG2= 4100 / Y range of the partialy readout
BIN-FCT1= 1 / Binning factor of axis 1
BIN-FCT2= 1 / Binning factor of axis 2
DET-VER = 'spcam20010412' / Version of the detector control command
INS-VER = 'Messia5/sup020829' / Version of the instrument (hard/soft)
WEATHER = 'Fare ' / Weather condition
SEEING = 0.00 / [arcsec] FWHM of the star at telescope focus
ADC-TYPE= 'IN ' / ADC name if it is used. (BLUE, RED, NONE)
ADC-STR = 28.630 / [mm] ADC pos. at the start of exposur
ADC-END = 29.370 / [mm] ADC pos. at the end of exposure
INR-STR = 151.887 / [degree] Inst. rotator angle at start
INR-END = 152.186 / [degree] Inst. rotator angle at end
DOM-WND = 0.10 / [m/s] Wind speed in the dome/enclosure
OUT-WND = 6.50 / [m/s] Wind speed outside dome/enclosure
DOM-TMP = 276.85 / [Kelvin] Atm. temp. in the dome/enclosure
OUT-TMP = 276.55 / [Kelvin] Atm. temp. outside the dome/encl.
DOM-HUM = 19.7 / [%] Humidity in the dome
OUT-HUM = 20.5 / [%] Humidity outside the dome/encl.
DOM-PRS = 622.30 / [hPa] Atm. pressure in the dome
OUT-PRS = 622.30 / [hPa] Atm. press. outside the dome/encl.
EXP1TIME= 180.0 / [s] one exposure time
COADD = 1 / number of exposure
M2-POS1 = 0.095 / [mm] Stewart Platform x-value
M2-POS2 = -0.533 / [mm] Stewart Platform x-value
M2-POS3 = 7.758 / [mm] Stewart Platform x-value
M2-ANG1 = -0.000 / [arcmin] Stewart Platform x-rotation angle
M2-ANG2 = -0.000 / [arcmin] Stewart Platform y-rotation angle
M2-ANG3 = 0.000 / [arcmin] Stewart Platform z-rotation angle
AUTOGUID= 'OFF ' / Autoguid on/off
COMMENT -------------------------------------------------------------
COMMENT --------------- PARAMETERS FOR SUPRIME_CAM ------------------
COMMENT -------------------------------------------------------------
S_UFNAME= 'object111_w7c3.fits' / User assigned file name
S_FRMPOS= '0401 ' / Frame position (IIJJ)
S_BCTAVE= 999.999 / [ADU] Average count outside effective data
S_BCTSD = 999.999 / [ADU] S.D. of the count outside the eff. data
S_AG-OBJ= 'N/A ' / Name of the guide-star
S_AG-RA = 'N/A ' / R.A. of the guide-star
S_AG-DEC= 'N/A ' / Dec. of the guide-star
S_AG-EQN= 2000.0 / [y] Equinox of the guide-star position
S_AG-X = 160.01 / [mm] Position of the guiding probe (X)
S_AG-Y = -0.03 / [mm] Position of the guiding probe (Y)
S_AG-R = 999.99 / [mm] Position of the guiding probe (R)
S_AG-TH = 999.99 / [degree] Position of the guiding probe (theta)
S_ETMED = 276.79 / [Kelvin] Averaged temp. in Camera enclosure
S_ETMAX = 0.00 / [Kelvin] Maximum temp. in Camera enclosure
S_ETMIN = 0.00 / [Kelvin] Minimum temp. in Camera enclosure
S_XFLIP = T / CCD readout is x-flipped when create image
S_YFLIP = T / CCD readout is y-flipped when create image
S_M2OFF1= 0.000 / [mm] Stewart Platform x-offset
S_M2OFF2= 0.000 / [mm] Stewart Platform y-offset
S_M2OFF3= 7.800 / [mm] Stewart Platform z-offset
S_DELTAZ= 0.000 / [mm] delta z for FocusTest
S_DELTAD= 0.00 / [arcsec] delta Dec for FocusTest
S_SENT = F / Already send to OBC
EQUINOX = 2000.0 / Standard FK5 (years)
CRVAL1 = 34.49019167 / Physical value of the reference pixel X
CRVAL2 = -5.43848889 / Physical value of the reference pixel Y
CRPIX1 = -3148.0 / Reference pixel in X (pixel)
CRPIX2 = -47.0 / Reference pixel in Y (pixel)
CDELT1 = -0.00005611 / X Scale projected on detector (#/pix)
CDELT2 = 0.00005611 / Y Scale projected on detector (#/pix)
PC001001= 1.00000000 / Pixel Coordinate translation matrix
PC001002= 0.00000000 / Pixel Coordinate translation matrix
PC002001= -0.00000000 / Pixel Coordinate translation matrix
PC002002= 1.00000000 / Pixel Coordinate translation matrix
LONGPOLE= 180.00000 / The North Pole of standard system (deg)
CTYPE1 = 'RA---TAN' / Pixel coordinate system
CTYPE2 = 'DEC--TAN' / Pixel coordinate system
CUNIT1 = 'degree ' / Units used in both CRVAL1 and CDELT1
CUNIT2 = 'degree ' / Units used in both CRVAL2 and CDELT2
WCS-ORIG= 'SUBARU Toolkit' / Origin of the WCS value
RADECSYS= 'FK5 ' / The equatorial coordinate system
CD1_1 = -0.00005611 / Pixel Coordinate translation matrix
CD1_2 = 0.00000000 / Pixel Coordinate translation matrix
CD2_1 = 0.00000000 / Pixel Coordinate translation matrix
CD2_2 = 0.00005611 / Pixel Coordinate translation matrix
END